D-Link DCS-5020L User Manual

34D-Link DCS-5222L User Manual
Section 4 - Conguration
Note: You MUST also set up your router/gateway for Port Forwarding/Mapping; this will enable remote viewing of your camera via the Internet. Please
refer to your router’s instruction manual on how to open up ports (port forward). For additional help on conguring your camera to work with your router,
please refer to Appendix A: Installing the DCS-5222L on a Router Without UPnP. For installing multiple cameras, ONE port per camera must be opened
on your router, in addition to the Web server (HTTP) port which is used for conguration. Also, some browsers may restrict some ports, such as 1 or 22, for
security purposes. If you have problems accessing your camera through HTTP, try using a port higher than 1024.
After making any changes, click the Save Settings button to save your changes, or click the Don’t Save Settings button to discard your changes.

D-Link DCS-5020L Specifications

General

Maximum resolution	640 x 480 pixels
Supported video modes	-
Video formats supported	H.264, M-JPEG
Supported graphics resolutions	160 x 112, 320 x 240, 640 x 480 (VGA)
Tilt angle range	0 - 30 °
Minimum illumination	0 lx
Sensor type	CMOS
Optical sensor size	1/5 \
Optical zoom	- x
Fixed focal length	2.2 mm
Security algorithms	HTTPS
Video motion detection	Yes
Built-in HDD	No
LED type	IR
Night vision distance	8 m
Form factor	Dome
Product color	Black, White
Connectivity technology	Wired & Wireless
Bundled software	D-ViewCam
Ethernet LAN (RJ-45) ports	1
Wi-Fi standards	Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
AC input voltage	12 V
DC output current	1 A
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	102.35 mm
Width	101.27 mm
Height	133.6 mm
Weight	292.4 g