49D-Link DCS-5222L User Manual
Section 4 - Conguration
Camera Control
This section allows you to congure the pan and tilt operations of
your camera. You can specify the lens location for the Home button,
and specify up to 24 pre-set lens locations, allowing you to quickly
view these pre-determined areas of the camera’s range from the Live
Video screen.
Click to set the current position as Home.
Click to set the Home position with the default
setting.
Select the speed at which the camera will pan for
a full cycle from the drop-down list. Select a value
between 0 and 10, 0 being the slowest setting.
Select the speed at which the camera will tilt for a
full cycle from the drop-down menu. Select a value
between 0 and 10, 0 being the slowest.
Enter a name for your camera location and click Add.
Select created presets from the drop-down menu.
If you want to delete an entry, select it and then
click Delete.
To use the Auto Patrol feature, select the desired
preset positions from the Preset Locations list and
add them to the Patrol Positions list by clicking
Select. You can then select the order in which the
camera will patrol through the preset locations by
selecting a location and clicking Up or Down. Click
Remove to remove a location from the list.
Click Save when nished.
Set As Home:
Default Home:
Pan Step:
Tilt Step:
Preset Name:
Present
Position:
Patrol
Selection:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
