33D-Link DCS-5222L User Manual
Section 4 - Conguration
This section allows you to congure your LAN and Internet
conguration.
Network
This option is used if you would like an IP address
assigned to your camera automatically by the DHCP
server (router). If the DHCP server does not exist
you will need to manually congure this setting.
This option is used to manually congure your
Camera’s IP settings. If this is selected, you will
need to enter the necessary information in order
to access your camera over a network.
Enable this option if the camera is directly
connected to a modem and your ISP requires a
user name and password in order to connect to
the Internet.
This option allocates the HTTP port of the camera.
This option allocates the RTSP port of the camera,
the RSTP port allows connections using QuickTime
or other supported media players.
Automatic IP
Address Select:
Static IP
Address:
PPPoE:
HTTP Port:
RTSP Port:
UPnP Enable:
UPnP Port
Forward:
Bonjour:
UPnP™ (Universal Plug & Play) can be used to allow discovery of a camera as a UPnP device in your network.
If your router supports UPnP, your camera and router can communicate allowing the router to discover which
ports are used by each camera automatically without the need to open ports or port forward.
Enabling Bonjour will allow discovery of cameras by Mac computers.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
