35D-Link DCS-5222L User Manual
Section 4 - Conguration
RTSP Port:
Enable CoS:
Enable QoS:
Enable IPV6:
Enable
Multicast for
stream:
The port number that you use for RTSP streaming
to mobile devices, such as mobile phones or PDAs.
The default port number is 554. You may specify
the address of a particular stream. For instance,
live1.sdp can be accessed at rtsp://x.x.x.x/video1.
sdp where the x.x.x.x represents the ip address of
your camera.
Enabling the Class of Service setting implements a
best-eort policy without making any bandwidth
reservations.
Enabling QoS allows you to specify a trac priority
policy to ensure a consistent Quality of Service
during busy periods. If the network camera is
connected to a router that itself implements QoS,
the router's settings will override the QoS settings
of the camera.
Enable the IPV6 setting to use the IPV6 protocol.
Enabling the option allows you to manually set up
the address, specify an optional IP address, specify
an optional router and an optional primary DNS.
The DCS-5222L allows you to multicast each of the
available streams via group address and specify
the TTL value for each stream. Enter the port and
TTL settings you wish to use if you do not want to
use the defaults.
To Next Page
Loading...
Need help?
Camera Specifications
Power
