D-Link DCS-700L User Manual

18D-Link DCS-700L User Manual
Section 2: Installation
Set Up a New Camera with the mydlink Baby App
Once the mydlink Baby app is installed, simply tap on the icon
to open the app. The next screen you see is the Setup Wizard.
Tap Setup to launch the Setup Wizard and congure your camera.
The wizard will guide you through the process of connecting
your camera to your home Wi-Fi network and creating your
mydlink account.
If you need help during the setup process, tap on the yellow (!)
symbol. Helpful hints will appear on the screen.
Note: Although the main screens that follow are for an iOS device, instructions for an Android device are very similar.
Note: If you experience issues registering this device with your
mydlink account, perform a hard reset by pressing and holding
the reset button on the device for 10 seconds while the device is
powered on.

D-Link DCS-700L Specifications

General

LED type	IR
Night mode	Yes
Sensor type	CMOS
Digital zoom	4 x
Video resolutions	320 x 240, 640 x 480 pixels
Fixed focal length	2.44 mm
Optical sensor size	1/5 \
Minimum illumination	0 lx
Night vision distance	5 m
Maximum aperture number	2.4
Certification	CE, CE LVD, FCC, IC, C-Tick
Maximum range	- m
Temperature sensor	-
Number of lullabies	5
Image formats supported	JPG
Video compression formats	M-JPEG
Temperature measurement range	0 - 40 °C
Mobile operating systems supported	Android 4.1, Android 4.2, Android 4.3, Android 4.4, Android 5.0, Android 5.1, iOS 5.0, iOS 6.0, iOS 6.1, iOS 7.0, iOS 7.1, iOS 7.2, iOS 8.0, iOS 8.1, iOS 8.2, iOS 8.3, iOS 8.4, iOS 9.0, iOS 9.1, iOS 9.2, iOS 9.3
Power source type	Battery, USB
Storage temperature (T-T)	-20 - 70 °C
Operating relative humidity (receiver)	20 - 80 %
Operating relative humidity (transmitter)	5 - 95 %
Interface	Wi-Fi
Wi-Fi standards	Wi-Fi 4 (802.11n)
USB connector type	Micro-USB
Product color	White

Weight and Dimensions

Transmitter weight	108.2 g