D-Link DCS-700L User Manual

23D-Link DCS-700L User Manual
Section 4: Conguration
• Under Lullaby…
Select how long the lullaby will play (in minutes)
when activated
• Under Events…
Check the ambient sound level. This level
number will change depending on how noisy
the background is
Change the Sound Detection level. Set the
Sound Detection Level higher than the Current
Level to receive alerts when noise exceeds the
current level. You can put the Detection Level
at the highest setting to disable sound alerts
- a higher detection level means less noise is
required to trigger an event
Change the motion detection sensitivity. You
can also put sensitivity at the lowest setting in
order to disable motion alerts

D-Link DCS-700L Specifications

General

LED type	IR
Night mode	Yes
Sensor type	CMOS
Digital zoom	4 x
Video resolutions	320 x 240, 640 x 480 pixels
Fixed focal length	2.44 mm
Optical sensor size	1/5 \
Minimum illumination	0 lx
Night vision distance	5 m
Maximum aperture number	2.4
Certification	CE, CE LVD, FCC, IC, C-Tick
Maximum range	- m
Temperature sensor	-
Number of lullabies	5
Image formats supported	JPG
Video compression formats	M-JPEG
Temperature measurement range	0 - 40 °C
Mobile operating systems supported	Android 4.1, Android 4.2, Android 4.3, Android 4.4, Android 5.0, Android 5.1, iOS 5.0, iOS 6.0, iOS 6.1, iOS 7.0, iOS 7.1, iOS 7.2, iOS 8.0, iOS 8.1, iOS 8.2, iOS 8.3, iOS 8.4, iOS 9.0, iOS 9.1, iOS 9.2, iOS 9.3
Power source type	Battery, USB
Storage temperature (T-T)	-20 - 70 °C
Operating relative humidity (receiver)	20 - 80 %
Operating relative humidity (transmitter)	5 - 95 %
Interface	Wi-Fi
Wi-Fi standards	Wi-Fi 4 (802.11n)
USB connector type	Micro-USB
Product color	White

Weight and Dimensions

Transmitter weight	108.2 g