31D-Link DCS-935L User Manual
Section 3 - Conguration
Motion Detection
Motion detection enables the camera to monitor the video feed for movement.
Enable Video
Motion:
Sensitivity:
Drawing Mode:
Clear:
Select this box to enable the motion detection feature of your camera.
Species how sensitive motion detection will be from 0% to 100%. A low
sensitivity setting means that there must be large changes between two images
in order to detect motion, and a high sensitivity setting means that even small
changes will cause motion to be detected.
Low sensitivities may be useful when monitoring an area that has ickering
lights or a window to the outside in view. High sensitivities may be useful when
monitoring an area that rarely changes, such as a storeroom or warehouse.
Select Draw Motion Area to select the area of the picture to monitor for
movement to trigger recording or a snapshot. Use your mouse to click and drag
on the area that you would like to monitor for motion. Select Erase Motion Area
to clear a selected region and stop the camera from monitoring that area of the
picture.
Clears all motion detection areas from the picture.
Click Save Settings to save your changes.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
