DGE-528T
4
ENGLISH
TROUBLESHOOTING
SETUP AND CONFIGURATION PROBLEMS
1. IF I’VE LOST MY CD, WHAT CAN I DO?
The CD contains software drivers and manual which can be obtained from D-Link (see
Technical Support below). Windows 8,7,Vista, and XP in most cases will automatically install the
correct drivers.
2. WHAT DO I DO IF THE INSTALLED CARD DOES NOT SEEM TO FUNCTION PROPERLY?
Check that the card appears under START>CONTROL PANEL>SYSTEM>HARDWARE>DEVICE
MANAGER>NETWORK ADAPTERS. If it does not appear, make sure you have inserted the PCI
card correctly or try inserting the card into an alternative PCI slot. If it appears with an error “!” or “?”,
remove or uninstall the device by right clicking on the device. Restart the computer, upon restart
Windows will redetect it. If the error persists, try removing the card and uninstalling the driver.
Repeat the installation process.
To Next Page
Loading...
Need help?
Operating Environment
Power
