D-Link DIR-605L User Manual

24D-Link DIR-605L User Manual
Section 3 - Conguration
Check the box to enable the DHCP server on your
router. Uncheck to disable this function.
Enter the starting and ending IP addresses for the
DHCP server’s IP assignment.
The length of time for the IP address lease. Enter
the Lease time in minutes.
Enable DHCP
Server:
DHCP IP
Address Range:
DHCP Lease
Time:
DHCP Server Settings
DHCP stands for Dynamic Host Control Protocol. The
DIR-605L has a built-in DHCP server. The DHCP Server
will automatically assign an IP address to the computers
on the LAN/private network. Be sure to set your
computers to be DHCP clients by setting their TCP/IP
settings to “Obtain an IP Address Automatically.” When
you turn your computers on, they will automatically load
the proper TCP/IP settings provided by the DIR-605L.
The DHCP Server will automatically allocate an unused
IP address from the IP address pool to the requesting
computer. You must specify the starting and ending
address of the IP address pool.

D-Link DIR-605L Specifications

General

Color	black
Wi-Fi Range	2.4835 ghz
Wi-Fi Speed	300 megabits per second
Wi-Fi Mesh System	no
Frequency Band	2.4 ghz
Ethernet Standard	10/100/1000
Wireless Standard	n
Antennas	2
Parental Control	yes
Firewall	nat, spi
Data Encryption	yes
Encryption Type	wpa, wpa2
Ports	other
Smart Applications	true, mydlink
System Requirements	pc: windows xp (sp3), vista or 7; mac: os x 10.5 or higher; linux; ethernet or wireless network interface; internet explorer 7, mozilla firefox 3.5, google chrome 8.0 or safari 4 or higher

Weight and Dimensions

Height	1.1 inches
Width	4.4 inches
Net Weight	0.5 pounds