D-Link DIR-605L User Manual

88D-Link DIR-605L User Manual
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK.
At the prompt, type ipcong and press Enter.
This will display the IP address, subnet mask, and the
default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation,
security settings, and the settings on your router.
Some rewall software programs may block a DHCP
request on newly installed adapters.
If you are connecting to a wireless network at a
hotspot (e.g. hotel, coee shop, airport), please contact an employee or administrator to verify their wireless network settings.

D-Link DIR-605L Specifications

General

Color	black
Wi-Fi Range	2.4835 ghz
Wi-Fi Speed	300 megabits per second
Wi-Fi Mesh System	no
Frequency Band	2.4 ghz
Ethernet Standard	10/100/1000
Wireless Standard	n
Antennas	2
Parental Control	yes
Firewall	nat, spi
Data Encryption	yes
Encryption Type	wpa, wpa2
Ports	other
Smart Applications	true, mydlink
System Requirements	pc: windows xp (sp3), vista or 7; mac: os x 10.5 or higher; linux; ethernet or wireless network interface; internet explorer 7, mozilla firefox 3.5, google chrome 8.0 or safari 4 or higher

Weight and Dimensions

Height	1.1 inches
Width	4.4 inches
Net Weight	0.5 pounds