D-Link DIR-605L User Manual

59D-Link DIR-605L User Manual
Section 6 - Setting Up Wi-Fi Protection (WCN 2.0 in Windows Vista)
Setting Up Wi-Fi Protection
(WCN 2.0 in Windows Vista)
The DIR-605L supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista. The instructions for setting this up depend
on whether you are using Windows Vista to congure the Router or third party software.
Initial Router Conguration for Wi-Fi Protection
When you rst set up the Router, Wi-Fi protection is disabled and uncongured. To enjoy the benets of Wi-Fi protection, the
Router must be both enabled and congured. There are three basic methods to accomplish this: use Windows Vista’s built-in
support for WCN 2.0, use software provided by a third party, or use the traditional Ethernet approach.
If you are running Windows Vista, tick the Enable checkbox on the Wireless Network window. Use the Current PIN that is
displayed on the Wireless Network window or choose to click the Generate New PIN button or Reset PIN to Default button.
If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are nished, proceed
to the next section to set up the newly-congured Router.

D-Link DIR-605L Specifications

General

Color	black
Wi-Fi Range	2.4835 ghz
Wi-Fi Speed	300 megabits per second
Wi-Fi Mesh System	no
Frequency Band	2.4 ghz
Ethernet Standard	10/100/1000
Wireless Standard	n
Antennas	2
Parental Control	yes
Firewall	nat, spi
Data Encryption	yes
Encryption Type	wpa, wpa2
Ports	other
Smart Applications	true, mydlink
System Requirements	pc: windows xp (sp3), vista or 7; mac: os x 10.5 or higher; linux; ethernet or wireless network interface; internet explorer 7, mozilla firefox 3.5, google chrome 8.0 or safari 4 or higher

Weight and Dimensions

Height	1.1 inches
Width	4.4 inches
Net Weight	0.5 pounds