D-Link DIR-632 Installation Instructions

Reset router by holding down reset button for 10 seconds, status light will go orange again but don't
worry it is just rebooting.
11.
You should be good to go, open a new browser window and type 192.168.0.1 and you should get the
Dlink login page. If this doesn't work, try again from step 1
12.
USB Storage
What follows are the steps needs to use storage devices connected to the routers USB port.
Connect the USB device to the Router.1.
Restart the router.2.
Open the DD-WRT's web interface in your web browser. It's http://192.168.1.1/ by default.3.
Services -> USB
Enable Core USB Support1.
Enable USB Storage Support2.
Enable Automatic Drive Mount3.
Select Save, and then Apply4.
You can ignore the Status: Not mounted message♦
4.
FTP Access
Once set up, you will be able to access all the mounted partitions by using ftp://192.168.1.1
Serices -> NAS1.
Enable ProFTPD2.
Select other settings and then select Save, and then Apply3.
File Sharing Access
Once set up, you can access your files using Universal Naming Convention (UNC) names; ex.
\\192.168.1.1\part1. Storage devices can be format as Fat16, Fat32, NTFS, and Ext2. The Ext3 drive format is
not support, and will not mount.
Serices -> NAS1.
Add Share2.
Select the Share's Path, enter and name, and indicate is it's public or not. If it's pubic you do not have
to add users.
3.
Repeat 2 and 3 for each share4.
Select Save, and then Apply5.
D-Link_DIR-632
USB Storage 5

D-Link DIR-632 Specifications

Device Interface

LAN ports	8 10/100 LAN Ports
WAN port	1 10/100 WAN Port
device management	Internet Explorer v7 or Later; Mozilla Firefox v3.0 or Later; or other Java-enabled Browsers

Weight and Dimensions

item dimensions	230mm x 150mm x 33mm
packaging dimensions	276.9mm x 66mm x 205.8mm
item weight	272.2 grams