D-Link DIR-632 Installation Instructions

Common Problems
Wireless Security WPA2 does not work with i Touches. Use WPA instead with AES or TKIP+AES
encryption.
•
When mounting USB devices, an odd message is produced indicating Status: Not mounted. This can
be ignored. Fixed in beta versions (since at least March 2015).
•
Can only load on the NA (North American) versions of the router. You need to Hex Edit the NA
firmware to load elsewhere per the instructions.
•
The undocumented button on the right side, near the front is a WDS or Wireless Distribution System
button. It's not used.
•
The WiFi Led doesn't light up. Not really a problem. Fixed in beta versions (since at least March
2015).
•
Suport
Support Thread: See Forum ... it's getting long.•
D-Link_DIR-632
Suport 7

D-Link DIR-632 Specifications

Device Interface

LAN ports	8 10/100 LAN Ports
WAN port	1 10/100 WAN Port
device management	Internet Explorer v7 or Later; Mozilla Firefox v3.0 or Later; or other Java-enabled Browsers

Weight and Dimensions

item dimensions	230mm x 150mm x 33mm
packaging dimensions	276.9mm x 66mm x 205.8mm
item weight	272.2 grams