EasyManuals Logo
Home>D-Link>Network Router>DIR-857

D-Link DIR-857 User Manual

D-Link DIR-857
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
69D-Link DIR-857 User Manual
Section 3 - Conguration
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that
can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has
read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and
user account passwords.
Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
Enter the new password for the User login. If you login as the
User, you cannot change the settings (you can only view them).
Enter a name for the DIR-857 router.
Enter a name for the router.
Enables a challenge-response test to require users to type
letters or numbers from a distorted image displayed on the
screen to prevent online hackers and unauthorized users from
gaining access to your router’s network settings.
Check to enable HTTPS to connect to the router securely.
Remote management allows the DIR-857 to be congured
from the Internet by a web browser. A username and password
is still required to access the Web-Management interface.
In general, only a member of your network can browse the
built-in web pages to perform Administrator tasks. This feature
enables you to perform Administrator tasks from the remote
(Internet) host. The port number used to access the DIR-857.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP
address of the DIR-857 and 8080 is the port used for the Web
Management interface.
If you have enabled HTTPS Server and checked Use HTTPS,
you must enter https:// as part of the URL to access the router
remotely.
This section will list any rules that are created. You may click the
Edit icon to change the settings or enable/disable the rule, or
click the Delete icon to remove the rule.
Admin Password:
User Password:
Gateway Name:
Enable Graphical
Authentication:
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin
Inbound Filter:
Details:

Table of Contents

Other manuals for D-Link DIR-857

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DIR-857 and is the answer not in the manual?

D-Link DIR-857 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Wi-Fi standards802.11a, 802.11b, 802.11g
Channels quantity2 channels
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)900 Mbit/s
Bandwidth2.4 GHz
Rack mountingNo
USB ports quantity1
Ethernet LAN (RJ-45) ports4
DHCP client-
Security algorithms128-bit WEP, 64-bit WEP, WPA, WPA2, WPS
CertificationFCC, IC, Wi-Fi
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product colorBlack
LED indicatorsPower, WLAN
Output voltage12 V
Weight and Dimensions IconWeight and Dimensions
Depth160 mm
Width213 mm
Height36 mm
Weight341.5 g

Related product manuals