Introduction
Thank you for purchasing the DKVM-2/4 KVM Switch. This product will
ensure easy and accurate control over 2 or 4 PCs through a single
console. The DKVM-2/4 is compatible with mice and keyboard with
PS/2 type connectors. Older style keyboards or mice can be used with
PS/2 adapters in the case that the device is PS/2 compatible. Most
older style serial keyboard and mice are not compatible with PS/2.
Advanced features like keyboard and mouse emulation for error free
boot-ups and support is also provided for the Microsoft Intellimouse
and Microsoft Intellimouse Explorer.
The DKVM-2/4 supports high resolutions. Resolutions up to 1920 x
1440 are supported with no deterioration of image quality.
Switching between PCs can be accomplished in two ways: through
keyboard “Hot Key” commands or by using the convenient front-panel
“Select” pushbutton controls.
Product Features
§ Allows a user to control 2/4 computers from one console.
§ Works with DOS, Windows, OS/2, UNIX, Linux etc.
§ No drivers or other additional software required.
§ Keyboard and mouse emulation allows error-free boot-up.
§ The status of the CAPS LOCK, SCROLL LOCK and NUM
LOCK keys is preserved for each of the computers.
§ Uses inexpensive and commonly available cables. Molded KVM
cables are recommended. Model No. DKVM-CB
§ Supports Monitor resolutions of up to 1920 x 1440.
§ Supports VGA, SVGA and Multisync monitors.
§ “Select” push-button or keyboard “Hot Key” control.
§ Comes with Auto-Scan mode for convenient automatic
switching.
§ Front panel status LEDs give a clear indication of the active PC.
To Next Page
Loading...
Need help?
General
