After you configure the IP phone, you need click save button in config under
Maintenance in the left catalog to save your configuration. Otherwise the phone
will lose your modification after power off and on.
7.3 Configuration via WEB
BASIC
7.3.1.1 STATUS
Status
Field name Explanation
Network Shows the configuration information on WAN and
LAN port, including the connect mode of WAN port
(Static, DHCP, PPPoE), MAC address, the IP address
of WAN port and LAN port, ON or OFF of DHCP
mode of LAN port and bridge mod
To Next Page
Loading...
Need help?
General
