D-Link DPH-120SE User Manual

Accounts Shows the phone numbers provided by the SIP LINE
1-2 servers .The last line shows the version number
and issued date.
7.3.1.2 WIZARD
Wizard
Please select the proper network mode according to the network condition.
DPH-120S/DPH-120SE provide three different network settings:
 Static: If your ISP server provides you the static IP address, please select
this mode, and then finish Static Mode setting. If you don’t know about
parameters of Static Mode setting, please ask your ISP for them.
 DHCP: In this mode, you will get the information from the DHCP server
automatically; need not to input this information artificially.
 PPPoE: In this mode, you must input your ADSL account and password.
You can also refer to2.2.1 Network setting to speed setting your network.
Choose Static IP MODE, click【NEXT】can config the network and
SIP(default SIP1)simply, also can browse too. Click【BACK】can return to
the last page.
IP Address Input the IP address distributed to you.
Subnet Mask Input the Netmask distributed to you.
IP Gateway Input the Gateway address distributed to you.
DNS Domain
Set DNS domain postfix. When the domain which you
input cannot be parsed, phone will automatically add

D-Link DPH-120SE Specifications

General

Brand	D-Link
Model	DPH-120SE
Category	IP Phone
Language	English