Name: D-Link DWL-3200AP - AirPremier - Wireless Access Point
Brand: D-Link
Rating: 4 (1 reviews)

To Next Page

To Previous Page

DWL-3200AP User’s Manual

D-Link Systems, Inc.

Using the AP Manager

Selecting Devices

The AP Manager allows you to conﬁgure multiple devices all at once. To select a single

device, simply click on the device you want to select. To select multiple devices, hold

down the Ctrl key while clicking on each additional device. To select an entire list, hold

the Shift key, click on the ﬁrst AP on the list and then click on the last AP on the list.

IP Conﬁguration

You can assign an IP address to an AP or assign IP addresses to multiple

AP’s by clicking on this button after selecting the device(s).

Select the AP that you want to assign an IP address to and click the IP button. Enter

the IP address and IP netmask for the selected device and click OK.

You can conﬁgure multiple AP’s with IP addresses all at once. Click on the IP button

after you’ve selected all of the AP’s you want to assign an IP address. Enter the IP

address you want to assign the ﬁrst unit and the AP manager will automatically assign

sequential IP addresses.

Questions and Answers:

Need help?

Do you have a question about the D-Link DWL-3200AP - AirPremier - Wireless Access Point and is the answer not in the manual?

D-Link DWL-3200AP - AirPremier - Wireless Access Point Specifications

General