D-Link DWR-512 User Manual

16D-Link DWR-512 User Manual
Section 3 - Conguration
PPPoE
Choose this Internet connection if your ISP provides you PPPoE account. After modifying any settings, click Save Settings to save your
changes.
The username/account name that your ISP
provides to you for PPPoE dial-up.
Password that your ISP provides to you for PPPoE dial-up.
Fill in with the same password in Password eld.
(Optional) Fill in if provided by your ISP.
(Optional) Fill in if provided by your ISP.
If not, keep the default value.
(Optional) Fill in if provided by your ISP. If not, keep the default value.
(Optional) Fill in if provided by your ISP. If not, keep the default value.
MAC address of WAN interface. You can also copy MAC address of your PC
to its WAN interface by pressing Clone Your PC’s MAC button. The Restore
MAC button will reset the router to its default MAC address.
The amount of time of inactivity before disconnecting established PPPoE session.
Set it to zero or enable Auto-reconnect will disable this feature.
The default setting of PPPoE is 1492.
The device will dial-up PPPoE connection automatically.
Username:
Password:
Verify Password:
Service Name:
IP Address:
Primary DNS Server:
Secondary DNS
Server:
MAC Address:
Maximum Idle Time:
Maximum
Transmission Unit
(MTU):
Auto-reconnect:

D-Link DWR-512 Specifications

General

Brand	D-Link
Model	DWR-512
Category	Network Router
Language	English