D-Link GO-SW-5E User Manual

6
UNPACKING AND SETUP
Unpacking
Open the box and carefully unpack it. The box should contain the
following items:
 One GO-SW-5E: 5-PORT FAST ETHERNET EASY DESKTOP
SWITCH
 One External Power Adapter
 Quick Installation Guide
If any item is missing or damaged, please contact your local reseller for a
replacement.
Setup
The setup of the GO-SW-5E can be performed using the following steps:
 The power outlet should be within 1.82 meters (6 feet) of the Switch.
 Visually inspect the DC power jack and make sure that it is fully
secured to the power adapter.
 Do not cover the ventilation holes on the sides of the Switch, and
make sure there is adequate ventilation around it.
 Do not place heavy objects on the switch.

D-Link GO-SW-5E Specifications

General

Switch type	Unmanaged
Switch layer	-
Power connector	DC-in jack
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Fast Ethernet (10/100)
Basic switching RJ-45 Ethernet ports quantity	5
10G support	No
Full duplex	Yes
Networking standards	IEEE 802.3, IEEE 802.3az, IEEE 802.3x
MAC address table	2000 entries
Power consumption (typical)	0.9 W
Number of power supply units	1
Product color	White
LED indicators	Activity, Link
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	47.85 mm
Width	87 mm
Height	21.7 mm