D-Link WDA-1320 User Manual

46D-Link WDA-1320 User Manual
Section 3 - Configuration
Connect to a Wireless Network
Using Windows Vista
™
Windows
®
Vista
™
users may use the built-in wireless utility. If you are using another company’s utility or Windows
®
2000, please refer
to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey”
option similar to the Windows
®
Vista
™
utility as seen below.
Right-click on the wireless computer icon in your system tray (lower-
right corner next to the time). Select Connect to a network.
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
or
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
If you get a good signal but cannot access the Internet, check you TCP/
IP settings for your wireless adapter. Refer to the Networking Basics
section in this manual for more information.

D-Link WDA-1320 Specifications

General

Brand	D-Link
Model	WDA-1320
Category	Adapter
Language	English