Daewoo B20S-2 User Manual

Power Train Disassembly & Assembly
26. After all the adjustments have been completed,
put Bearing Mount Compound on the outside
diameter of cap (11) and install it.
27. Put Gasket Maker on cover (10) and the housing
assembly. Also, use Quick Cure Primer if the
temperature is below 10 °C (50 °F).
End By:
a. Install power transfer group.
Final Drives And Hubs
Remove Final Drives And Hubs
Start By:
a. Remove brakes.
1. Bend back one of the tabs in locking washer (1).
2. Remove nut (3) with tool (A). Remove locking
washer (1) and bearing (2).
3. Remove cover and hub assembly (4).
4. Remove bearing cone (5) from the spindle.
Tools Needed A
Spanner Wrench 1
45
10
11
2
3
4
5
1

Daewoo B20S-2 Specifications

General

Brand	Daewoo
Model	B20S-2
Category	Multi Terrain Loaders
Language	English