Daewoo DLT-22L2T User Manual

23
16
PR 19 – – – – –
Mono
Full Screen
PR/PAGE
SELECT
OK
PR/PAGE
To Watch TV
- If the AV1 terminal on the TV set is connected with an external device, which is switched on, the TV will come ON
in AV1 mode. Otherwise, TV will come ON in the last mode used.
1. Turning on the TV.
a) If the stand-by indicator is red (blue in DLT-19/
22L1/L2), then the TV set is in stand-by mode.
You can switch on using the remote control
“ POWER ” button (press and hold 0,5 second),
the N UM B ER 0…9 buttons, or PR UP / D OW N
buttons. The local PR UP / DOWN buttons on
the TV can also be used. Once on, the stand-
by indicator turns to green (blue or off in DLT-
19/22L1/L2) and the picture appears on the
screen.
b) If the stand-by indicator is not lit, then the TV
set is powered off. You must switch ON the TV
set local MAIN POWER switch on the set. If a
picture does not appear, then the stand-by
indicator will be red. In this case, use the re-
mote control as indicated in a).
c) If the stand-by indicator is flashing red (blue
and off in DLT-19/22L1/L2), and green then
the TV set is in child lock mode. It is neces-
sary to use the remote control POWER but-
ton, NUMBER 0…9 buttons, or PR UP / DOWN
buttons. The local PR UP / DOWN buttons on
the TV will not function. Once on, the stand-
by indicator turns to green (blue or off in DLT-
19/22L1/L2) and the picture appears on the
screen.
2. Adjust program.
• Select the desired program by pressing the
“ PR ” button or the number button.
3. Adjust volume.
• Sound reduces by pressing the “ VOL ” but-
ton.
• Sound increases by pressing the “ VOL ” but-
ton.
Note : Sound mutes by pressing the “ MUTE ” ( )
button.
4. Turning off the TV.
• Pressing the remote control “ POWER ” button
and hold 0,5 second, will switch off the TVto
stand-by mode (low power consumption mode)

Daewoo DLT-22L2T Specifications

General

Brand	Daewoo
Model	DLT-22L2T
Category	LCD TV
Language	English