19
CELSIUS TO FAHRENHEIT CONVERSION CHART
CELSIUS FAHRENHEIT
18 64.4
19 66.2
20 68
21 69.8
22 71.6
23 73.4
24 75.2
25 77
CELSIUS FAHRENHEIT
26 78.8
27 80.6
28 82.4
29 84.2
30 86
31 87.8
32 89.6
NOTES:
• When operating the remote controller, make sure there are no obstructions between the remote controller
and the remote sensor.
• After a while the display goes blank to conserve battery power. To check the settings, press the ON/OFF
button once.
1.Press the ON/OFF button on the remote control to
turn the unit on; the On LED will light on the indoor
unit and “ON” will light in the remote display.
2.Make sure the indicator appears in the remote
display. Using the TEMP. ▼ or ▲ buttons, set the
desired temperature. The desired temperature can be
changed up or down 1 degree from the actual room
temperature. For temperature setting: 24~28°C
3.Then the unit will automatically operate.
TO SET THE UNIT TO AUTO MODE
This unit will automatically operate the unit according to its surroundings while in the Auto mode. All you have to set is
the desired temperature and it will control the fan, coolness and dehumidifier. Follow procedures below:
To Next Page
Loading...
Need help?
General
