BONNET
SKI SLEEVE
• When the ski sleeve is not used,
keep the lid closed.
• Before folding up the ski sleeve for
storage, make sure it is dry both
inside and outside.
This will help prevent mildew
forming.
3. Open the boot and load your skis from
the boot into the interior.
4. Use the strap on the ski sleeve to se-
cure it tightly to the armrest.
button
2. Push the button located in the upper
side of the opening to open the ski
sleeve lid in the boot.
1. Pull down the rear seat armrest and
open the cover behind it.
To use the ski sleeve;
A ski sleeve is located behind the rear
armrest.
You can transport skis or other long thin
objects safely without soiling or damaging
the interior of your vehicle.
4. Before closing the bonnet, return the
support rod to its clip.
5. Lower the bonnet and make sure it
locks into place by pressing gently on
the front of the bonnet.
1. To open the bonnet, pull the release
knob to unlatch the bonnet.
A
~- /clil
pull
l~
2. Pull the hook up and lift the bonnet.
3. Hold the bonnet open with the support
rod.
4-2
To Next Page
Loading...
Need help?
General
