84
11-3. Refrigerator Leveling & Door Adjustment
In case freezer door is lower
than refrigerator door
Insert a screw driver (flat tip) into a groove of the
left wheel (bottom of freezer) and turn it clockwise
until the door is balanced.
(clockwise to raise freezer door ;
counterclockwise to lower)
※Refrigerator must be level in order to maintain optimal performance and desirable front appearance.
(If the floor beneath the refrigerator is uneven, freezer and refrigerator doors look unbalanced.)
Insert a screw driver (flat tip) into a groove of the
right wheel (bottom of refrigerator) and turn it
clockwise until the door is balanced.
(clockwise to raise refrigerator door ;
counterclockwise to lower)
The front of refrigerator needs to be higher just a little than the back for easy
door closing, but if the wheel is raised too much for door balance, i.e. front of
refrigerator is too higher than the back, it can be difficult to open the door.
Caution
In case refrigerator door is lower
than refrigerator door
To Next Page
Loading...
Need help?
General
