7
Initial
INSTALLATION
Edit
Moving the channels
Position the cursor to Pr. No. to move and press the SLEEP button.
Select Pr. No. the colour will be changed.
Position the cursor to Pr. No. to change and press the SLEEP button.
Skipping the channels
You can select skip “Yes” or “No” with theCBbuttons.
A programme marked with with Skip “Yes” is skipped when using PR
buttons, however, whenever a skipped.
Pr. No. is selected by Digits 0~9 the number on the screen will be
displayed in red along with the picture.
Delete programme position data
Position the cursor to Pr. No. to delete and press the CLEAR button.
While this is being carried out the “Please wait !” appears and the
deleted Pr.No. will transfer to programme No. 99 and is changed to
skip “Yes”.
Enter a station Name
Press the CB button.
Station name tables appear above the screen.
Using the VW button, select the desired letter or number or blank .
If you want to store press button.
Manual tuning
Locate the cursor to Manual tuning with VW buttons at the Install
menu and then press CB buttons.
During manual tuning “Please wait !” On Screen Display will be
displayed.
Keep tuning until the channel received matches the programme
number.
Fine tuning
If you are unable to get a good picture or sound because of poor
reception, it is possible to adjust the fine tuning, to try to improve it
Select the Fine tuning at the Install menu press CB buttons to get
the best picture and sound.
The Edit menu shows you the programme position assignment.
You can change this programme position assignment according to your personal preferences.
Please wait!
Manual tuning C01 > P01
Fine tuning 06
ABCDEFGHIJKLMNOPQRST
UVWXYZ+-. 0123456789
VW
: Select CLEAR: Delete
CB
: Access SLEEP : Move
MENU : Previous : Store
Edit
Pr Name Ch Skip
01
-----
C52 Yes
02
-----
C52 Yes
03
-----
C52 Yes
04
-----
C52 Yes
05
-----
C52 Yes
06
-----
C52 Yes
W
To Next Page
Loading...
Need help?
General
