41
Sound Adjustment
3. To adjust the audio equalizer
• Move to Equalizer in the Sound menu.
• Select and use the relevant frequency by pressing the
”
▼▼
/
▲▲
” button.
• You can adjust the degree of the frequency by using
the ”
◀◀
/
▶▶
” button.
4. Select Balance Mode
• Move to Balance in the Sound menu.
• Select “Balance” by pressing ”
◀◀
/
▶▶
” button, then the
sound balance of left and right speaker is Adjusted.
When adjusting sound to taste
1. Select AVC Mode
• Select Auto Volume Control On/Off by pressing
”
◀◀
/
▶▶
” button, then the volume is grown up
automatically.”
2. Select Dynamic Bass Mode
• Move to Dynamic Bass in the Sound menu.
• Select either Dynamic Bass On or Off using the
”
◀◀
/
▶▶
” button.
Note :
• Dynamic Bass : Using this function, you are able to enjoy
the bass effect.”
Note :
• Whenever you adjust the audio equalizer, it stores in the Favourite mode.
• Equalizer: High quality sound range adjustment method used for audio product.
120Hz, 500Hz: Low sound range / 1.5KHz, 5KHz: Middle sound range / 10KHz: High sound range
- The user can enjoy various sounds by adjusting Sound Mode, Equalizer, Balance and Amp Speaker.
5. Select S.EFFECT Mode
• The S.EFFECT changes as follows :
Off => SPATIAL => 3D Panorama => Off
Note :
• 3D PANORAMA: This function generates virtual surround
sound from the left and right speaker by developing
the existing surround system function.
To Next Page
Loading...
Need help?
General