25
5-1. IE (Input Error) Error - Failure in Water Supply
1) Conditions
1 The preset water level is not reached within 20 minutes after the water supply starts or resumes.
2 During wash: The error occurs 4 minutes after the water level remains unchanged or 20 minutes after the
water level starts changing.
3 During rinse: The error occurs 20 minutes after the cycle starts.
2) The "LE" error flickers on the display panel.
3) If the Power button is turned off and on, the error display disappears.
5-2.OE (Output Error) Error - Failure in Water Drainage
1) Conditions
1 The preset water level is not reached within 10 minutes after the water starts being drained.
2 Overload situations caused by failures in drainage take place 18 times during the final main spin cycle.
2) The "LE" error flickers on the display panel.
3) If the Power button is turned off and on, the error display disappears.
5-3. LE (Lock Error) Error - Failure in Door Unlocking
1) Conditions
1 The Start/Pause button is pressed to run the cycle when the door is open.
2 The error disappears promptly when the door is closed and the subsequent cycle starts.
2) The "LE" error flickers on the display panel.
3) If the Power button is turned off and on, the error display disappears.
5. Error Alerts
To Next Page
Need help?
General