2. Door Switch
3. Multi-Duct As ( In Freshfood Compartment )
DISASSEMBLY
No No
Remove top cover hinge screw with (+) driver. Remove the Door Switch from the cover hinge.
Separate the Cover hinge by using driver. Disconnect door switch connector.
Be careful not to scratch the cabniet surface.
42
31
ProcedureProcedure
No No
1
Remove screw cap with (-) driver(2 points)
Unscrew 2 points with (+)driver Disconnect the Sensor wire housing.
Procedure
3
2
Procedure
20