You can also call up the PRESET menu at the MAIN MENU.
Press the NUMBER button 0..9 or UP/DOWN buttons to select a
programme number you want.
The screen will change according to the selected programme
number.
SEARCHING A CHANNELS
Locate a cursor to with LEFT/RIGHT button and then
press the UP or DOWN button.
The tuning screen will appear and the cursor will move from left
to right.
Pressing and holding down the UP/DOWN button during 2 sec-
onds, the band will change as following:
VL-VH-U (For GB, U only).
After searching a station, the tuning screen will disappear.
To stop searching, press the MENU button.
FINE TUNING
If you are unable to get a good picture or sound because of a
poor broadcasting signal, it is possible to adjust the fine tuning.
Move the cursor to and press UP or DOWN button to acti-
vate fine tuning up or down.
It obly operates whilst the UP or DOWN button is being pressed.
ENTER A STATION NAME
Select station name in the station name list with UP/DOWN but-
ton and press OK button.
If you want to delete a station name, select "----".
If you can't find the desired name in the list, you can enter your
own.
To do so, move the cursor to the right and press OK button.
Using the UP/DOWN button, select the desired letter, number or
blank.
Press the RIGHT button to select the next position.
Press the OK button to complete this procedure.
TO STORE PROGRAMME IN MEMORY
Move the cursor to the right end with the LEFT/RIGHT button.
Select the programme number that you want to store current dis-
playing programme with station name, fine tuning data and sys-
tem (FRANCE only) in memory using the UP/DOWN button or
NUMBER 0..9.
Press the OK button.
6
MANUAL CHANNEL SETTING
To Next Page
Loading...
Need help?
General
