EasyManua.ls Logo

Dahua DHI-ITC413-PW4D-IZ3 User Manual

Dahua DHI-ITC413-PW4D-IZ3
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Installation and Configuration Manual
34
Motherboard of DHI-IPMECD-203X barrier gate
Remote control
Question and Answer IconNeed help?

Do you have a question about the Dahua DHI-ITC413-PW4D-IZ3 and is the answer not in the manual?

Dahua DHI-ITC413-PW4D-IZ3 Specifications

General IconGeneral
Image Sensor1/1.8" CMOS
Lens TypeMotorized vari-focal
Focal Length8 mm–32 mm
ApertureAuto/Manual
Digital Zoom16x
WDR120 dB
Protection LevelIP67
Zoom4x
Min Illumination0 Lux (IR on)
Day/NightAuto/Color/B/W
Video CompressionH.265; H.264; MJPEG
Bit Rate32 Kbps–16 Mbps
Audio1 input, 1 output
NetworkRJ45 10/100Mbps
ProtocolsIPv4; IPv6; HTTP; HTTPS; TCP; UDP; ARP; RTP; RTSP; RTCP; SMTP; FTP; DHCP; DNS; DDNS; NTP; Multicast; ICMP
Power SupplyAC24V; DC12V; PoE
Operating Humidity≤95% (non-condensing)
Shutter Speed1/100, 000 s–1 s
Frame Rate50/60 fps @ 2688 × 1520

Summary

2 Installation

2.2 Installation

Introduces the procedures for installing the system components, focusing on physical setup.

2.2.2 Installing Cameras

Provides detailed steps and considerations for installing the ANPR cameras.

2.2.2.2 Pole Mount

Step-by-step guide for mounting cameras on poles, including junction box and bracket.

2.2.2.3 Wall Mount

Step-by-step guide for mounting cameras on walls using junction boxes and expansion screws.

2.2.2.4 Ceiling Mount

Step-by-step guide for mounting cameras on ceilings using junction boxes and expansion screws.

2.2.3 Installing Anti-smashing Radars

Instructions for installing the anti-smashing radar devices in the vertical direction of the lane.

2.2.4 Installing Barrier Gates

Procedures for the physical installation of barrier gate equipment, including base box and foundation.

4 System Configuration

4.1.1 Device initialization

Steps for initializing the camera and setting initial parameters like IP address and password.

4.1.3 Configuring Barrier Control

Settings for controlling barrier gate opening and closing based on vehicle detection and allowlists.

4.3 Checking System Functions

Capture Check

Verifies if snapshots and recognition results are generated correctly on the webpage.

Barrier Control Check

Checks physical circuits and camera allowlist parameters for barrier opening functionality.

5 FAQ

5.3 Common Problems and Solutions

A table outlining common device issues, including camera, network, and barrier gate problems, with solutions.

Related product manuals