Name: Dahua DHI-ITC413-PW4D-Z1
Brand: Dahua
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Installation and Configuration Manual

A snapshot

4.1.3 Configuring Barrier Control

You can set the barrier control mode, and configure information of opening, and closing barrier.

Usually, the barrier closing signal is output by the radar. If the camera is required to output the signal,

you need to configure the corresponding output port on the camera and connect this port with the

barrier closing cable.

Step 1 Select Setting > ANPR > Barrier Control > Barrier Control.

Barrier control

Step 2 Configure parameters.

Table 4-1 Barrier control parameter description

Questions and Answers:

Need help?

Do you have a question about the Dahua DHI-ITC413-PW4D-Z1 and is the answer not in the manual?

Dahua DHI-ITC413-PW4D-Z1 Specifications

General