Daikin ALTHERMA User Guide

User Guide – Small Monobloc
Changing the hot water timer settings
If you wish to set the hot water to heat at times other than those
already set, you need to adjust the controller:
1.
2.
To enter the schedule timer function, press
Press the
begins to flash on the display
Press
button until the
symbol
3.
4.
The time of the 1st action will now appear, you can scroll
through any programmed actions via
5.
To adjust the action push and hold
begins to flash
You can now adjust the action time via
until the display
6.
7.
8.
Use
to choose on/off
To confirm the changes press
the next action
, it will then advance to
9.
Repeat the last step until all required actions are programmed
10. Press and hold
until ‘setting’ appears to save the changes
11. Press
repeatedly to go back through the screen levels
until you are back to the normal screen
Setting the clock
If for any reason you require to re-set the clock,
1.
2.
3.
4.
Push and hold the
Adjust the time via the
Adjust the day via the
button until the clock starts to flash
To save the changes push

Daikin ALTHERMA Specifications

General

Type	Air-to-Water Heat Pump
Energy Efficiency	A+++ (Heating)
Coefficient of Performance (COP)	5.0
Refrigerant	R-32
Operating Temperature Range (Cooling)	10°C
Sound Power Level	65 dB(A)
Heating Capacity	4 kW to 16 kW (depending on model)