To Next Page

To Previous Page

Preparation before Operation

 Turn the breaker on

• After the power is turned on, the ap of the indoor unit opens and closes once to set the

reference position.

NOTE

 Tips for saving energy

• Be careful not to cool (heat) the room too much.

Keeping the temperature setting at a moderate

level helps save energy.

• Cover windows with a blind or a curtain.

Blocking sunlight and air from outdoors

increases the cooling (heating) effect.

Recommended temperature setting

For cooling: 26

– 28°C

For heating: 20 – 24°C

• Clogged air lters cause inefcient operation and waste energy. Clean them once in about

every 2 weeks.

 Please note

• The air conditioner always consumes 15

– 35W of electricity even while it is not operating.

• If you are not going to use the air conditioner for a long period, for example in spring or

autumn, turn the breaker off.

• Use the air conditioner in the following conditions.

Mode Operating conditions If operation is continued out of this range

COOL Outdoor temperature: -10 – 46°C

Indoor temperature: 18 – 32°C

Indoor humidity: 80% max.

• A safety device may work to stop the operation.

• Condensation may occur on the indoor unit and drip.

HEAT Outdoor temperature: -15 – 24°C

Indoor temperature: 10 – 30°C

• A safety device may work to stop the operation.

DRY Outdoor temperature: -10 – 46°C

Indoor temperature: 18 – 32°C

Indoor humidity: 80% max.

• A safety device may work to stop the operation.

• Condensation may occur on the indoor unit and drip.

• Operation outside this humidity or temperature range may cause a safety device to disable

the system.

Daikin ATXB25C User Manual

Other manuals for Daikin ATXB25C