13
COMFORT AIRFLOW Operation
The ow of air will be in the upward direction while in COOL
operation and in the downward direction while in HEAT operation,
which will provide a comfortable wind that will not come in direct
contact with people.
To start COMFORT AIRFLOW
operation
1. Press .
• The ap position will change, preventing air from blowing
directly on the occupants of the room.
• “
” is displayed on the LCD.
• Airow rate is set to Auto.
COOL/DRY: The ap will go up.
HEAT: The ap will go down.
To cancel COMFORT AIRFLOW
operation
2. Press again.
• The ap will return to the memory position from before
COMFORT AIRFLOW mode.
• “
” disappears from the LCD.
COOL operation HEAT operation
NOTE
Notes on COMFORT AIRFLOW operation
• The ap position will change, preventing air from blowing directly on the occupants of the
room.
• POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same
time.
Priority is given to the function of whichever button is pressed last.
• The airow rate will be set to Auto. If the upper and lower airow direction is selected, the
COMFORT AIRFLOW operation will be canceled.
To Next Page
Loading...
Need help?
General
