20
OFF TIMER Operation
Timer functions are useful for automatically switching the air
conditioner on or off at night or in the morning. You can also use
OFF TIMER and ON TIMER in combination.
■
To use OFF TIMER operation
• Check that the clock is correct.
If not, set the clock to the present time. (page 8.)
1. Press .
• “ ” and setting time are displayed on the LCD.
• “ ” is displayed on the LCD.
•“ ” blinks.
2. Press until the time setting reaches
the point you like.
• Each pressing of either button increases or decreases
the time setting by 10 minutes. Holding down either
button changes the setting rapidly.
3. Press again.
• The TIMER lamp lights up.
■
To cancel the OFF TIMER
Operation
4. Press .
• “ ” and setting time disappear from the LCD.
• “ ” and day of the week are displayed on the LCD.
• The TIMER lamp goes off.
NOTE
■ Notes on TIMER operation
• When TIMER is set, the present time is not displayed.
• Once you set ON/OFF TIMER, the time setting is kept in the memory. The memory is
canceled when remote controller batteries are replaced.
• When operating the unit via the ON/OFF TIMER, the actual length of operation may vary
from the time entered by the user. (Maximum approx. 10 minutes)
■ NIGHT SET mode
When the OFF TIMER is set, the air conditioner automatically adjusts the temperature
setting (0.5°C up in COOL, 2.0°C down in HEAT) to prevent excessive cooling (heating) for
your pleasant sleep.
01_EN_3P248442-3.fm Page 20 Tuesday, September 8, 2009 1:54 PM
To Next Page
Loading...
Need help?
General
