8
Preparation before Operation
■
To set the clock
1. Press .
• “ ” is displayed.
• “ ” and “ ” blinks.
2. Press to set the current day of the
week.
3. Press .
• “ ” blinks.
4. Press to set the clock to the present
time.
• Holding down or rapidly increases or decreases
the time display.
5. Press .
• Always point the remote controller at the indoor unit
when pushing the buttons when setting the indoor unit’s
internal clock.
•“ ” blinks.
■
Turn the breaker on
• Turning on the breaker opens once and closes the flaps. (This is a normal procedure.)
NOTE
■ Note on setting the clock
• If the indoor unit’s internal clock is not set to the correct time, the WEEKLY TIMER will not
operate punctually.
01_EN_3P248442-3.fm Page 8 Tuesday, September 8, 2009 1:54 PM
To Next Page
Loading...
Need help?
General
