Daikin FVXM25A2V1B User Manual

4 | About the system
User reference guide
13
CVXM20+FVXM25~50A2V1B
Split system air conditioners
4P625990-1A – 2020.10
g ON/OFF button, Daikin eye and timer lamp
h Air inlet
i Louvers (vertical blades)
j Room temperature sensor
ON/OFF button
If the user interface is missing, you can use the ON/OFF button on the indoor unit
to start/stop operation. When operation is started using this button, the following
settings are used:
▪ Operation mode = Automatic
▪ Temperature setting = 25°C
▪ Airflow rate = Automatic
4.1.1 Daikin eye indication lamp
Daikin eye color will change according to operation.
a
b
a ON/OFF button
b Daikin eye
Operation Daikin eye color
Automatic Red/blue
Drying Green
Cooling Blue
Heating Red
Fan only White
Timer operation Orange
(a)
(a)
When the OFF/ON timer or Weekly timer operation is set, the Daikin eye periodically
changes to orange. After lighting orange for about 10seconds, it returns to the colour of
the operation mode for 3minutes. Example: When the timer is set during cooling
operation, the Daikin eye will periodically light orange for 10seconds, and then switch to
blue for 3minutes.
4.2 About the user interface
▪ Direct sunlight. Do NOT expose the user interface to direct sunlight.
▪ Dust. Dust on the signal transmitter or receiver will reduce sensitivity. Wipe off
dust with a soft cloth.
▪ Fluorescent lights. Signal communication might be disabled if fluorescent lamps
are in the room. In that case, contact your installer.
▪ Other appliances. If the user interface signals operate other appliances, move
the other appliances, or contact your installer.
▪ Curtains. Make sure that the signal between the unit and the user interface is
NOT blocked by curtains or other objects.

Daikin FVXM25A2V1B Specifications

General

Brand	Daikin
Model	FVXM25A2V1B
Category	Air Conditioner
Language	English