ESIE15-11A | Part 3. Field settings 1. Wireless remote controller BRC4C and BRC7C/E
23/09/16 Page 21
VRV4 indoor units
Part 3. Field settings
This part contains the following chapters:
1. Wireless remote controller BRC4C and BRC7C/E
1.1. Access field settings
1. When in the normal mode, press the “ ” button for 4 seconds or more, and operation then enters the “field setting mode.”
2. Select the desired “mode No.” with the “ ” button.
3. Pressing the “ ” button, select the first code No.
4. Pressing the “ ” button, select the second code No.
5. Press the timer “ ” button and check the settings.
6. Press the “ ” button to return to the normal mode.
(Example)
When setting the filter sign time to “Filter contamination heavy/light” in all group unit setting, set the Mode No. to “10”, the first code
No. to “0” and second code No. to “02”.
1. Wireless remote controller BRC4C and BRC7C/E .....................21
2. Wired remote controller BRC2/3E52 ..........................................22
3. Wired remote controller BRC1D51/52 ........................................27
4. Wired remote controller BRC1E51 .............................................30
5. Wired remote controller BRC1E52 .............................................35
6. General indoor units....................................................................41
7. Presence sensor BRYQ140A7 (for 3x3 cassette) / BRYQ60A7 (for
2x2 cassette).................................................................................. 46
8. Selfcleaning panel BYCQ140D7G ............................................. 47
9. Aircurtain CAV/CYV ................................................................... 48
10. VKM ......................................................................................... 48
11. FXSQ-A / FXNQ-A / FXDQ-A / FXMQ-P/MB / FXTQ-A ........... 51
12. Factory settings........................................................................ 53
MODE NO.
FIELD SETTING MODE
3
4
5
SECOND CODE NO.
FIRST CODE NO.
2
1, 6