Before use, read these Safety Precautions to ensure proper handling of equipment.
safety information, therefore observe them at all times.
death.
damage.
In some situations, the consequences may be grave.
The icons used in this manual mean the following.
Never do.
instructions.
plug.
Do not disassemble.
hands.
Do not wet.
After reading this manual, keep it in a handy place for future reference by users.
Power supply
cord and plug
Use only a 220-240V power supply. •
Other power supplies may lead to fi re or electric shock.
Do not damage, remodel, bend unreasonably, pull, twist or use the •
power supply cord bundled up.
Also, do not place heavy objects on or pinch the power supply cord.
Damage to the power supply cord may lead to fi re or electric shock.
Do not use the unit when the power supply cord or the power plug is •
damaged or plugged loosely into an electrical socket.
A damaged or loose cord or plug may lead to fi re because of a short circuit or electric shock.
Do not use the unit beyond the rating of the electrical socket or •
branching device.
Exceeding the rating of multiple socket outlets may lead to fi re because of overheating.
Do not connect or disconnect the power plug to turn the unit ON / OFF. •
Abusive handling may lead to electric shock or fi re because of overheating.
Insert the power plug into the electrical socket all the way to the base. •
Incomplete connections may lead to electric shock or fi re because of overheating.
Periodically clean the dust and other matter from the power plug with •
a dry cloth.
Insulation failure caused by humidity or other factors may lead to fi re.
Stop operation and disconnect the power plug if you detect anything •
strange such as burning odours.
Continued use of the unit without resolving abnormalities such as burning odours may lead to
electric shock or fi re because of overheating.
Consult your dealer.
If the power supply cord is damaged, it must be replaced by the •
manufacturer, dealer or qualifi ed persons in order to avoid a hazard.
A damaged cord may lead to electric shock or fi re because of overheating.
To reduce the risk of electric shock, this equipment has a polarized •
plug (one blade is wider than the other). This plug will fi t in a polarized
outlet only one way. If the plug does not fi t fully in the outlet, reverse
the plug. If it still does not fi t, contact qualifi ed personnel to install the
proper outlet. Do not alter the plug in any way.
Before cleaning or relocating the unit, stop operation and disconnect •
the power plug from the electrical socket.
Handling the unit while it is plugged in may lead to electric shock or damage.
Main unit
Do not use the unit anywhere there is airborne oil such as machine oil. •
Airborne oil may lead to cracking, electric shock or ignition.
Do not use the unit anywhere there are abundant oil vapours such as •
in kitchens, combustible or corrosive gases, or metallic dust.
These kinds of environments may lead to fi re or damage.
Keep fi ngers and objects out of the air inlets, air outlet and other •
openings.
Improper handling may lead to electric shock, injury or damage.
Do not wet the air outlet or unit frame. •
Contact with water may lead to fi re or electric shock.
To Next Page
Loading...
Need help?
General
