7
Normal Operation
1
Select Cool or Heat with the Mode Switch.
2
Select RUN with the Program Switch.
3
Normally leave the fan switched to Auto. In Fan Auto, the fan
will turn on only with a heat or cool demand. When Fan On is
selected, the fan will run continuously.
4
The desired set temperature may be temporarily overridden.
The thermostat will revert to the programmed settings in the
following time period.
WARMER
BUTTONS
RUN program
Program OFF
SET program
SET
HEAT
BATTERIES
COOL
OFF
PROGRAM
RUN OFF SET
RESET
FILTER
FAN
NEXT
HEAT
AUTO
ON
On or Auto
FAN
SWITCH
MODE SWITCH
Cool, Off, or Heat
Su
PM
Programmed Operation
To Next Page
Loading...
Need help?
General
