3.5 The menu structure
3.5.1 Home screen
The Home screen is split into three sections:
Header Indicates the actual onsite temperature («T») and
humidity («H») as well as the battery status in
gaphic form and as a percentage value.
Read out The current angle readout in degrees, relative to the
last calibration of the unit.
Footer From the Home screen, the following functions are
accessible:
MENU Left-hand button to enter the Þ Main menu
«Menu».
LASER Please observe the "Safety precautions
when using laser equipment"!
The right-hand button provides access to the laser
function with the following options:
On Þ Flash mode Þ Off
Please also refer to Þ Chapter 5.4 "Using the
laser" on page 17.
3.5.2 Main menu «Menu»
The main menu screen provides direct access to the:
Þ Meter settings
Þ Sender settings
3.5.3 Meter settings
History
Displays the last four readings of the inclinometer.
The readings are saved every time the unit is
powered off, or when the sender unit is
disconnected.
Auto
power
Defines the auto power-off timer between 1 min.
(default), 2 min. and 5 min.
Temp. unit
°C/°F
Defines the temperature units.
Version Displays the currently installed firmware version
of both the meter and the sender units.
If the sender unit is not connected, «Offline» will
be displayed instead.
d&b ArraySight Manual 1.7 en10
To Next Page
Loading...
Need help?
General