3.3 Switching on/switching off
Please observe the "Safety precautions when using
laser equipment!"
1. To switch on the meter unit, hold down both buttons below the
screen.
↳
The menu screen will illuminate and initially display the d&b
logo. The unit will then switch to the «Home» screen and
display the current angle readout.
2. Release both buttons.
3. To power down the meter unit (and the connected sender
unit), proceed in the same manner until the «Shutting down»
message is displayed.
3.4 User interface of the meter unit
The meter unit features a detailed graphical display with an
intuitive on-screen menu system.
Navigation through the menus is by two buttons below the display.
Within the main menu and the submenus, the left-hand button is
generally used to scroll down through the menu items
Þ «SCROLL». The corresponding menu items are marked by an
asterisk (
).
The right-hand button is used to select a function Þ «SELECT».
Apart from that, the buttons have different functions within the
various submenus. The current function is always indicated above
each button (e.g. «BACK», SET, «CANCEL», «INC»...)
The display is backlit for viewing in all light conditions.
d&b ArraySight Manual 1.7 en 9
To Next Page
Loading...
Need help?
General