Safety Notes
25
1 Safety Notes
Achtung!
To avoid injury of persons and
damages to the device, it is ab-
solutely necessary to carefully
read and observe these Instruc-
tions.
Necessary assembly, start-up, and
maintenance work may be
performed only by qualified and
authorized personnel.
Please comply with the instructions
of the system manufacturer or
system operator.
2 General Information
2.1 Definition of Application
The electrical actuator is used for
Danfoss valves with nominal
values DN 15 – 50 and for nominal
pressures PN 16/25.
The technical data on the rating
plates and the data given in
section 3.3 determine the use.
2.2 Transportation, Delivery,
and Storage
Permissible ambient conditions
for storage and transportation:
Ambient temperature:
-10 °C to +70 °C
The devices must be protected
against:
l Humidity
l Dampness
l Dirt
l Shocks
Verification of Delivery:
Immendiately upon receipt, the
shipment must be checked for
completeness. The data of the
device must be compared with the
information on the delivery note
and in the order documents.
2.3 Warranty
Any warranty claim requires
proper assembly and commission-
ing in accordance with the
applicable Assembly, Start-up,
and Maintenance Instructions for
the device.
To Next Page
Loading...
Need help?
General
