Danfoss APP 1.5 User Manual

Data sheet APP pumps - APP 1.5-3.5
10
521B0850 / DKCFN.PD.013.FA6.02 / 09.2012
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
12.1 Warranty
Danfoss APP pumps are designed for long
operation, low maintenance and reduced
lifecycle costs.
Provided that the pump has been running
according to the Danfoss specications, Danfoss
guarantees 8,000 hours service-free operation,
however, max. 18 months from date of produc-
tion.
If Danfoss recommendations concerning
system-design are not followed, it will strongly
inuence the life of the APP pumps.
12.2 Maintenance
After 8,000 hours of operation it is strongly
recommended to inspect the pump and
change any worn parts, e.g. pistons and shaft
seal. This is done in order to prevent a potential
breakdown of the pump.
If the parts are not replaced, more frequent
inspection is recommended according to our
guidelines.
Standstill
The APP pumps are made of Duplex/Super
Duplex materials with excellent corrosion
properties. It is, however, always recommended
to ush the pump with freshwater when the
system is shut down.
12.3 Repair
In case of irregular function of the APP, please
contact the Danfoss RO Solutions Sales Organisa-
tion.
12. Service
Danfoss A/S
High Pressure Pumps
DK-6430 Nordborg
Denmark
2. APP pump instruction
APP 0.6-3.5 (180R9065)
ro-solutions.com
Instruction
APP pump instruction
APP 0.6-1.0, APP 1.5-2.5 and
APP 3.0-3.5
MAKING MODERN LIVING POSSIBLE

Danfoss APP 1.5 Specifications

General

Brand	Danfoss
Model	APP 1.5
Category	Water Pump
Language	English