Danfoss APP 1.5 User Manual

6. Trouble shooting guide
ro-solutions.com
Guideline
Trouble shooting guide
for APP and APP S 674 pumps
MAKING MODERN LIVING POSSIBLE
Parts list APP 0.6-43 / APM 0.8-2.9 / APP W 5.1-10.2
26
521B0941 / DKCFN.PC.073.A13.02 / 10.2013
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss A/S
High Pressure Pumps
DK-6430 Nordborg
Denmark
24. Tool sets
Designation
180B4188 – Tool set (APP 0.6-1.0 Compact) 180B4142 – Tool set (APP 0.6-1.0) 180B4148 – Tool set (APP 1.5-3.5) 180B4162 – Tool set (APP 5.1-10.2) 180B4230 – Tool set (APP 11-13) 180B4222 – Tool set (APP 16-22) 180B4172 – Tool set (APP 21-43)
Shaft bush x
Press bush x
Drift x
Torx (T30) x
Shaft bush (Ø18) x x
Press bush (Ø18) x x
Allen key (4 mm) x
Allen key (5 mm) x
Allen key (6 mm) x x x x
Shaft bush (Ø35) x
Shaft seal extractor (Ø35) x x
Press bush (Ø35) x x
Adjustable pin wrench x x x x
Combination wrench (10 mm) x x x x
Combination wrench (13 mm) x x x
Nut (M8x6.5x13) x x x
Guide bolt (M8x140) x x
Shaft seal extractor (Ø45) x x
Press bush (Ø45) x x
Eye bolt (M8) x x
Press bush for valve plate x x
Stop for retainer plate x
Screw (M8x20) x x x
Screw (M8x70) x x
Note:
The parts listed are not sold
separately, only in various kits.

Danfoss APP 1.5 Specifications

General

Brand	Danfoss
Model	APP 1.5
Category	Water Pump
Language	English