7 Default setting in the control computer
The first column in the table below shows the parameters that can be
adjusted by the User. The second column shows settings made at the
factory, and the third column the settings made by the installation con-
tractor in connection with installation of the heat pump.
Setting Factory setting Any customer spe-
cific settings
ROOM 20°C
OPERAT. AUTO
CURVE 40°C
MIN 10°C
MAX 55°C
CURVE 5 0°C
CURVE 0 0°C
CURVE -5 0°C
HEAT STOP 17°C
26 – User manual VUBMA902
To Next Page
Loading...
Need help?
General