User guide
You have now defined the starting time, duration, and •
ending time of the first comfort temperature period.
Repeat as required to define subsequent comfort tempera-•
ture periods.
When the set time passes 0:00 in either direction, the •
weekday display changes to the next or previous day
(depending on which direction the button is being
turned). In this way it is possible to program an entire
week with different comfort and economy temperatures
for each day.
The intervals between the comfort temperature periods •
become economy temperature periods.
Press and hold for 3 seconds. disappears from the
display.
The display returns to normal.•
2.1.4 Setting minimum floor temperature
(This only applies if the thermostat is configured to use a
room and floor sensor.)
Press and hold for 9 seconds. “MFt” (Minimum Floor
Temperature) appears on the display.
To Next Page
Loading...
Need help?
General
