User guide
Set the minimum floor temperature.
Press to confirm. The display returns to normal.
The floor temperature is kept above the set lower limit.•
2.2 Troubleshooting
In case of an error, the hour display starts flashing and the •
weekday display indicates an error code from 2 to 7.
Refer to the description of error messages in section 6 of •
the Installation Manual.
If the system does not function correctly, call a qualified •
electrician.
2.3 Uninstalling Product
The product should only be uninstalled by a qualified •
electrician.
To Next Page
Loading...
Need help?
General
